Table of Contents
Advertisement
Press and hold VOICE CTRL. for at least 2 seconds to activate the Voice Recognition mode.
After the Voice Recognition mode is activated and "Speak" is displayed, you can make a phone call,
play a song, etc., via this unit by inputting voice control commands*.
* Please refer to your Smartphone manual for other voice control commands.
NOTE:
• You can perform this operation only when a Voice recognition compatible Smartphone is
connected. If the Smartphone is not compatible with the Voice recognition, "No Support" is
displayed for 2 seconds.
• The Voice recognition function performance depends on the recognition range of the Smart-
phone and mounting location of the microphone. Please pay attention when the microphone is
mounted.
• Voice recognition operation depends on the function of the Smartphone. For details, refer to the
Owner's Manual of the Smartphone.
• If a called person that you say is not found, "No Call" is displayed for 2 seconds.
• Please obey all local traffic laws while using this function.
Calling
Call History is recorded for the last dialed/received/missed calls (20 records for each). There are
various ways of making calls based on the "Calling". The following steps 1 through 5 are common
to the various ways of making these calls. For details, refer to each individual category for making
calls.
1. Press
.
The outgoing method list is displayed.
2. Turn the Rotary encoder to select the outgoing mode.
Dialed:
Dialed history
Received:
Received history
Missed:
Missed incoming history
Phone Book:
Smartphone phone book
3. Press
/ENTER
The outgoing mode is activated, and each mode list is displayed.
4. Turn the Rotary encoder to select a name or a telephone number from the list.
E L E C T R O N I C S
83
Advertisement
Table of Contents
