Table of Contents
Advertisement
Setting The Visible Mode
You can set whether this unit can be recognized or not from a Bluetooth compatible device.
Normally set this to ON.
• Setting item:
OFF:
Disable recognition of this unit from the Bluetooth compatible device.
ON:
Enable recognition of this unit from the Bluetooth compatible device.
1. Press and hold AUDIO/SETUP for at least 2 seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select "Bluetooth", and then press
3. Turn the Rotary encoder to select Visible Mode and then press
4. Turn the Rotary encoder to select either OFF or ON (Initial setting) and press
5. Press and hold AUDIO/SETUP for at least 2 seconds to return to normal mode.
Pairing A Bluetooth Device From The Unit
If your Bluetooth device is not immediately pairing, the head unit can perform a search. The search
can find paired or unpaired devices.
1. Press and hold AUDIO/SETUP for at least 2 seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select "Bluetooth", and then press
3. Turn the Rotary encoder to select Search Device and then press
4. When Search Device is selected and "Searching" is displayed, the search gets started.
NOTE:
The "Searching" operation can be stopped by pressing
5. Turn the Rotary encoder to select the name of the device to be connected from the Device
Search list and press
6. If this unit is successfully connected to a Bluetooth compatible device, "Connected" is
displayed, and then the unit returns to normal mode.
Depending on the Smartphone, it may be necessary to input a passcode. In this case, "Pass
code 0000" is displayed. Input the pass code "0000" in the Bluetooth compatible device to
make the pairing. After the pairing is completed, the unit will automatically connect to the
Bluetooth compatible device. If you input the wrong pass code or the communication fails,
"Failed" is displayed.
Setting The Bluetooth Sound Quality
You can flexibly customize the sound of a call to fit your own preferences.
1. Press and hold AUDIO/SETUP for at least 2 seconds to activate the SETUP mode.
2. Turn the Rotary encoder to select "Bluetooth", and then press
/ENTER.
E L E C T R O N I C S
/ENTER.
/ENTER.
/ENTER.
/ENTER.
.
/ENTER.
/ENTER.
79
Advertisement
Table of Contents
