Lorex LW1741 User Manual page 64

13
Troubleshooting
Problem
Bright spot in image
while viewing camera
at night
There is no audio from
the camera(s)
#LX400030; r. 1.0/17112/17628; en-US
Solution
• This occurs when a camera is pointed at a window to see
outside, because the night vision LED's produce Infrared
light that reflects off the glass. If you need to look outside, in-
stall the camera outdoors. Please note that the camera
must be installed under shelter when placed outdoors.
• Make sure the receiver volume is not muted. Turn the re-
ceiver volume up.
• Ensure you are viewing your cameras in Single Channel or
Auto Sequence Viewing mode. There is no audio in Quad
mode.
60