Lorex LW1741 User Manual page 10

Lw1740 series lw2740 series
Hide thumbs Also See for LW1741:
Table of Contents

Advertisement

Available languages

Available languages

3
Installing the Camera(s)
3. Loosen the adjustment ring on the metal camera stand(s) and move the
camera to the desired position. Tighten the adjustment ring when finished,
holding the camera firmly in position.
4. Connect one end of the camera's power adapter to the camera and the
other end to an electrical outlet or surge protector. Make sure the power
connector is fully inserted to avoid water getting in the plug.
Note
Power cables are only weather resistant when fully inserted at the connection point.
Power cables may not be submerged in water.
5. Remove the protective film from the front of the camera. If the film is not
removed, it will affect the quality of the picture.
#LX400030; r. 1.0/17112/17628; en-US
6

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lw1742Lw1744Lw2742

Table of Contents