Replacing the power-adapter
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Slide the power-adapter port into the slot on the palm-rest assembly.
2
Replace the screw that secures the power-adapter port to the palm-rest
assembly.
3
Route the power-adapter port cable along its routing guides on the palm-rest
assembly.
Post-requisites
1
Replace the
display
2
Replace the
system
3
Replace the
heat-sink
4
Replace the
IO
5
Replace the
wireless
6
Replace the
memory
7
Follow the procedure from step 3 to step 5 in "Replacing the
8
Follow the procedure from step 3 to step 7 in "Replacing the
computer. After working inside your computer,
After working inside your
assembly.
board.
assembly.
board.
card.
module.
computer. For more safety
Replacing the power-adapter port
34
port
hard
drive".
base
cover".
79