9
Remove the
Procedure
1
Open the display as far as possible.
2
Open the latch and disconnect the power-button board cable from the
system board.
3
Open the latch and disconnect the touch-pad cable from the system board.
1
latch
3
touch-pad cable
4
Close the display and turn the computer over.
5
Remove the screw that secures the wireless-card bracket to the system board.
6
Remove the screw that secures the display hinge to the system board.
heat-sink
assembly.
2
power-button board cable
4
latch
Removing the system board
64