WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Place the fan on the heat sink.
2
Adhere the tape that secures the fan cable to the heat-sink assembly.
3
Turn the heat-sink assembly over.
4
In sequential order, as indicated on the heat sink, tighten the captive screws
that secure the heat-sink assembly to the system board.
Post-requisites
1
Replace the
heat-sink
2
Follow the procedure from step 3 to step 7 in "Replacing the
3
Replace the keyboard.
4
Follow the procedure from step 4 to step 5 in "Replacing the
5
Replace the battery.
Replacing the fan
computer. After working inside your computer,
After working inside your
assembly.
28
computer. For more safety
base
cover".
optical
drive".
Replacing the fan
62