Sony KDS-R50XBR1 Training Manual page 44

TVP-21
DSU-Board Removal (cont.)
Screws
Connector
Pull
Swing out
Pull
5
Disconnect the CableCard ribbon
cable (Reference Chapter 6 page
14 for procedure).
Detach CableCard assembly from
the Chassis assembly.
Remove 3 screws.
Lay the CableCard assembly to
the side
6
Grasp the top and bottom of the
DSU-Board shield on the far left
side of the Chassis assembly
and pull out. The Q-Box. PD-
Board, and DSU-board will
swing outward together.
Disassembly Procedures
41