Sony KDS-R50XBR1 Training Manual page 31

TVP-21
Removal of Complete Chassis Assembly (cont.)
Disconnect
Cables on each side of the
chassis assembly
Disconnect
connector
Angle out
Around
vertical
bracket
Slide to
the left
Power Block cable
4
Slide Chassis out until it is stopped
by the vertical bracket. Before
attempting to remove the Chassis
assembly disconnect the wires as
illustrated in the photo.
Fan
5
Angle the left side of Chassis
assembly out.
Slide the Chassis to the left (around
Vertical
the vertical bracket and pull chassis
Bracket
out.
CAUTION:
Do not remove the vertical
bracket. This bracket is critical
support for the Upper mirror and
screen block.
6
Completely remove the Chassis
assembly and disconnect Lamp
Power Supply Block cable.
Disassembly Procedures
28