Removing The Mcr Unit - Sharp UP-X500 Installation Manual

3-3. Removing the LCD cabinet
1. Remove the screw 1 .
2. Use a screwdriver to catch the notched section and disassemble
the MCR rear cabinet 2 .
Caution: • Wrap the screwdriver with waste cloth when using it without
scratching the cabinet.
• Rotate it in the direction of A and slide it in the direction of B,
and it will come off easily.
3. Remove two screws 3 , and disassemble the LCD rear cabinet 4
from the MCR side.
4. Remove screw 5 , and disassemble the Clamp 6 .
2
A
1
B
3-4. Removing the LCD unit
1. Remove six screws 1 , and remove the touch panel 2 , the inserter
cable 3 , and the LED cable 4 , and disassemble the LCD assembly.
2. Remove four screws 5 , and disassemble the LCD unit 7 from the
LCD plate 6 .
Caution: Tighten the screw 1 at 3.5kg.
1
1
6
1
1
5
2
5
Cloth
3
4
3
5
6
5
5
1
3
1
4
7
UP-X500I Removing the MCR unit
3-5. Removing the touch panel
Remove the T/P angle A 2 , T/P angle B 3 , with screws 1 .
And disassemble the Touch panel 2 .
1
1
2
1
1
3

4. Removing the MCR unit

1. Remove the MCR rear cabinet (Reference [3-3]).
2. Remove the screw 1 , and remove the MCR cable 2 and disassemble
the MCR 3 .
1
3
– 2 –
4
1
1
2
1
3
1
2