Application > P-Series Xq Setup - Printronix T8000 Administrator's Manual

Application > P-Series Setup > SFCC d command
This menu option is for backward compatibility.
Even dot plot
Double High
Factory Default
Application > P-Series Setup > PSeries Dbl High
This menu option allows printing compatibility between the current and
older models of Printronix printers.
Normal
P3/4/6/9 Com-
pat.
Factory Default
The FF valid at TOF option determines whether the printer will perform a
Form Feed when the host sends a Form Feed command, if the printer is at
the top of form.
Disable
Enable
Factory Default
Application > P-SERIES XQ Setup
IMPORTANT
The P-SERIES XQ Setup submenu will only be present when the LP+ Emulation
menu is set to P-SERIES XQ. Otherwise, this menu will be replaced with the
LP+ Emulation menu.
IMPORTANT
This LP+ emulation does not have any specific Character Group or Character
Set selection.
150
This option interprets the SFCC d command as even
dot plot.
This option interprets the SFCC d command as dou-
ble high. Select this option for backward compatibility.
Even dot plot
This is normal Double High printing for current model
printers.
Where older printers printed two dot rows higher, this
option allows for compatibility by raising the print two
dot rows to match the current models dot row value
(two dot rows lower).
Normal
Application > P-Series Setup > FF valid at TOF
Will not perform a form feed when the host sends a
Form Feed and the printer is at the top of form.
Performs a form feed when the host sends a Form
Feed and the printer is at the top of form.
Enable