Printronix T8000 Administrator's Manual page 91

Determines if the printer will power-up in the ONLINE state or OFFLINE
state (Home screen).
On
Cont. Beep
Off
Factory Default
Determines if distances in the MEDIA section are displayed in inches or mil-
limeters.
In Inches
In Millimeters
Factory Default
Displays the number of pages remaining to be printed in a print job on the
ONLINE screen message area. This feature is supported in PGL and ZGL
only.
Disable
Enable
Factory Default
PGL Syntax
ZGL Syntax
WARNING
System > Control > Alarm
An audible alarm sounds (3 beeps) when a fault oc-
curs, such as a paper jam.
A continuous audible alarm sounds when a fault oc-
curs, which can be stopped by pressing PAUSE.
No audible alarm sounds.
On
System > Control > Media Units
Inches are used.
Millimeters are used.
In Inches
System > Control > Batch Counter
Remaining pages is not displayed.
The number of remaining pages is displayed.
Disable
~EXECUTE;formname;[;FC][;ICNTn][;FCNTn]
^PQ(#Pages)
If the correct execute command is absent from the
print file, "0 Pages" will continually display on the
control panel.
91