Gree GWC09KF-D3DNXXA Owner's Manual page 12

Operation of remote controller
7 HEALTH SAVE:
Press HEALTH part of this button to turn on or off HEALTH function.
Pressing SAVE part of this button,
mode. Press SAVE part of the button again to cancel SAVE function. During SAVE
operation, the temperature and fan speed is not adjustable.
:
8
●
Press button to start or stop left & right swing function.The remote controller
defaults to simple swing condition.
●
Press + button and
simple swing and static swing;
In static swing condition, pressing
●
changes as below:
●
If the unit is turned off during swing operation,the louver will stop at present position.
9 X-FAN:
Pressing X-FAN button in COOL or DRY mode,the icon "X-FAN" is displayed and the
indoor fan will continue operation for 10 minutes in order to dry the indoor unit even though
you have turned off the unit.
After energization, X-FAN OFF is defaulted. X-FAN is not available in AUTO, FAN and
HEAT mode.
Note:X-FAN is the alternative expression of BLOW for the purpose of understanding.
10 TEMP:
Press this button, could select displaying the indoor setting temperature or indoor ambient
temperature.When the indoor unit firstly power on it will display the setting temperature,
if the temperature's displaying status is changed from other status to"
ambient temperature, 5s later or within 5s, it receives other remote control signal that will
return to display the setting temperature. if the users haven't set up the temperature
displaying status,that will display the setting temperature.
11 TIMER:
Press TIMER button at unit ON to set TIMER OFF; HOUR OFF blinks. Press TIMER
button at unit OFF to set TIMER ON; HOUR ON blinks. In this case, pressing + or -
button changes time setting. Holding down either button rapidly changes time setting
(time setting range 0.5-24hours). Press TIMER button again to confirm setting; HOUR
ON/OFF stops blinking. If there is not any operation of button within 5 seconds during
HOUR ON/OFF blinking, TIMER setting will be cancelled.
12 TURBO:
Press this button to activate / deactivate the Turbo function which enables the unit to
reach the preset temperature in shortest time. In COOL mode, the unit will blow strong
cooling air at super high fan speed. In HEAT mode, the unit will blow strong heating air
at super high fan speed. (This function is not applicable for some models).
is displayed and the unit goes into SAVE operation
button at the same time at unit OFF to switch between
blinks for 2 seconds.
button, the swing angle of left & right louver
9
",displays the