Valor 1500IN (NG) Installation & Owner's Manual page 50

QUALIFIED
INSTALLER
2. Mix the black and grey shale pieces and spread
them in one layer thick on top of the burner around
the three rocks. Do not overfi ll!
3. Install the rocks around the shale bed according to
the image shown below.
Note: Some of the rocks may overhang slightly over
the burner edge.
4. Add the twigs to the rocks placing them as shown.
Note: The position of the twigs are specifi c to obtain
the best fl ame pattern.
Note: The acceptable variations are only for rocks
installed on the black platform outside of the shale
bed or pilot shield. Do not put any rock on the pilot
shield! Do not put more rocks on the shale bed
than what is shown below!
Pilot shield
Rocks & shale fuel bed installed
50
Installation