Tips For Aas - GCC Technologies EXPERT 24 LX User Manual

5.6

Tips for AAS

For getting better results of contour cutting, there are some tips below for your reference.
Keep light sources simple and avoid illuminating from the sides of cutter.
Before operating AAS, change the maximum paper size in Expert 24 LX driver
property.
STEP 1 Find the Expert 24 LX model in the "Printer & Fax" folder of your PC.
STEP 2 Open the Properties window and select the "Paper" tab.
STEP 3 Change the maximum Paper Size of X to 1200mm.
Adjust the cutting speed to between 200~400mm/sec.
Avoid the registration marks locating on the tracks of pinch rollers.
Automatic-Aligning System 5-9
Expert 24 LX User Manual