Health O Meter 2842KL User Instructions page 7

ASSEMBLY INSTRUCTIONS (CONT.)
1. Place the base assembly upside
down on a flat, steady surface.
2. Screw the four feet into the base
assembly. Turn each foot
completely into the base
assembly and then back out 1 1/2
turns.
3. Carefully turn the base assembly
right side up. Adjust the feet as
necessary for a level, stable
platform. Do not drop the scale as
this may damage the load cells.
4. Place the display head into the
display bracket and screw in the
two display assembly screws. If
wall mounting the display,
complete this step after the
display assembly bracket has
been mounted to the wall.
7