Famastil F-POWER Instruction Manual page 19

for operations different from those
intended could result in a hazardous
situation.
SERVICE
23 Have your power tool serviced only by
F-Power authorized service center using
only original replacement parts. This will
ensure that the safety of the power tool
is maintained.
ADDITIONAL SAFETY INSTRUCTIONS
24
Use ear plugs. Exposure to noise can
cause hearing loss.
Hold the power tool by insulated
25
gripping surfaces when performing an
operation where the cutting tool may
contact hidden wiring or the cable itself.
Contact with energized wires will cause
the energization of the exposed metal
parts of the machine and may cause
electrical shock to the operator.
26 Use clamps or other practical way
to fix and support the work piece in a
stable platform. Holding the workpiece
by hand or against your bodyamy
cause instability and may lead to loss
of control, causing possible accidents.
Before drilling into walls, floors or
ceilings verify the location of wiring and
water pipes.
27 Avoid touching the tip of the drill after
drill, because it can be hot.
ELECTRIC SECURITY
28
This tool is double insulated;therefore
no earth wire is required. Always check
that the power supply corresponds to
the voltage on the rating plate.
29
This appliance is not intended
for use by young or infirm persons
without supervision. Children must be
supervised to ensure they do not play
with the appliance. If the supply cord
is damaged, it must be replaced by the
manufacturer, or an equally qualified
person in order to avoid a hazard. If the
supply cord is replaced by an equally
qualified person, but not authorized by
Famastil F-Power, the warranty will lose
effect.
WARNING!
If the power cord is damaged,
it must be replaced by the
manufacturer, authorized Famastil
F-POWER Technical Assistance
Service or an equally qualified
person in order to avoid damage or
injury. If the power cord
is replaced by an equally qualified
person, but not authorized by
Famastil F-POWER, the warranty
will not be valid.
19