Toyota 2003 Avalon Service Manual page 181

"MODE" button (air flow selector)
Push the "MODE" button to select the
vents used for air flow.
In automatic operation, you do not have
to select the air flow unless you desire
another air flow mode.
'03 AVALON U (L/O 0206)
1. Panel—Air flows mainly from
instrument panel vents.
2. Bi−level—Air flows from both the floor
vents and the instrument panel vents.
When you set the temperature selector
setting at about the middle in automatic
operation, warm air flows out of the
floor vents and relatively low−tempera-
ture air flows out of the center and
side vents.
3. Floor—Air flows mainly from the floor
vents.
4. Floor/Windshield—Air flows mainly
from the floor vents and windshield
vents.
Use with the air intake selector posi-
tioned in FRESH.
For details about air flow selector settings,
see "—Air flow selector settings"
scribed below.
2003 AVALON (OM41401U)
I n f o r ma t i o n P r o v i d e d b y :
the
Windshield air flow button
When this button is pressed, air flows
mainly from the windshield vents and
turns on the defogging function with the
purpose of clearing the front view.
Pressing this button once again returns
de-
the air flow mode to the last one used.
This button allows the air intake to select
FRESH automatically. This is to clean up
the front view more quickly. If you want
to return the setting to RECIRCULATE
mode, press the air intake selector button
once again.
Press the "A/C" button for dehumidified
heating or cooling. This setting clears the
front view more quickly.
177