Toyota 2003 Avalon Service Manual page 180

"AUTO" button
For automatic operation of the air condi-
tioning, press the "AUTO" button. "AUTO"
will appear on the display to show that
the automatic operation mode has been
selected.
In the automatic operation mode, the air
conditioning selects the most suitable fan
speed, air flow, air intake and on−off of
the air conditioning according to the tem-
perature.
When you press the "AUTO" button with
the air intake mode at FRESH, internal
circulation may be applied for maximum
cooling.
You may use manual controls if you want
to select your own settings.
To turn off the automatic operation, press
the "OFF" button.
Fan speed selector
Push the ">" (increase) or "<" (decrease)
side of the button to adjust the fan speed.
In automatic operation, you do not have
to adjust the fan speed unless you desire
another fan speed mode.
176
'03 AVALON U (L/O 0206)
Temperature selector
To increase the temperature, press the
" " side, to decrease it, press the " "
side.
"MAX. COLD" appears when you adjust to
maximum cooling, and "MAX. HOT" when
you adjust to maximum warming.
The temperature display changes between
"_C" and "_F" when the unit of the outside
temperature display is changed.
"DUAL" button
This switch is used to set the tempera-
tures independently for the driver's seat
and front passenger seat.
Pushing the button changes the mode
from independent and linked.
Independent mode: Temperatures can be
set independently for the driver's seat and
front passenger's seat. "DUAL" will appear
on the display to show that the indepen-
dent mode has been selected.
Linked mode: The same temperature is
set for the driver's seat and front passen-
ger's seat.
When the temperature for the front pas-
senger's seat is changed in linked mode,
the mode is changed automatically to in-
dependent mode.
2003 AVALON (OM41401U)
I n f o r ma t i o n P r o v i d e d b y :
Knowledge for the two−temperature se-
lector operation
This air conditioning system has two inde-
pendent temperature selectors: left and
right (for the use of driver and front pas-
senger respectively).
D
There are cases where the temperature
of the airflow may not accurately corre-
late on the driver and front passenger
side according to circumstances, even
if the left and right temperature selec-
tors are set at the same temperature.
If this situation occurs, use the fine
tune operation to adjust the air temper-
ature on one side.
D
There are cases where one or both of
the airflow temperatures may not accu-
rately correlate with the set tempera-
ture according to circumstances, when
the airflow temperature settings on the
left and right are substantially different.
For example, if the left controller is set
at central or neutral temperature while
the right one is set at maximum heat-
ing or maximum cooling, or vice versa.
If this situation occurs, use the fine
tune operation to adjust the air temper-
ature on each side.
"OFF" button
Push the "OFF" button to turn off the air
conditioning system.