Table of Contents
Advertisement
MAINTENANCE
• Always release tension on the blade when the saw is not
in use.
• Clean the saw regularly with a soft bristle brush or by vac-
uuming to keep cutting dust from accumulating.
• An occasional application of a light dab of grease on
the front and rear trunnions F will keep the tilting mecha-
nism working smoothly. If you find the tilting mechanism
becoming more difficult to operate, thoroughly wipe off
any built-up cutting dust on the trunnions and re-apply a
little grease.
• The bearings in the drive mechanism are sealed and
permanently lubricated and do not need to be oiled or
greased..
RECOMMENDED OPTIONAL ACCESSORIES
We offer some optional accessories available from your local General International dealer for increased con-
venience, productivity, accuracy and safety when using your scroll saw.
For more information about our products, please visit our website at www.general.ca
BLADE GUARD:
#EX-02
Optional upper and
lower blade guard
assembly will help pre-
vent unintentional or
accidental hand/finger
contact with the saw
blade.
To fit your EX-16CE, EX-
21CE or EX-30CE scroll
saw.
Notes
F
Underside View
STAND:
#EX-21BS/EX-30BS
Heavy duty adjustable
height, flared steel stand,
designed specifically to fit
your EX-16CE, EX-21CE (EX-
21BS) or EX-30CE (EX-30BS)
scroll saw. Wide stance
design with sturdy cross-
bracing for stable vibration-
free operation.
19
Hide quick links:
Advertisement
Table of Contents
