7. Press the [E.P.] button and start writing. (Fig. 4)
8. After writing downloading successfully, the "Program
Finished" is displayed.
Press the [OK] button. (Fig. 5)
9. Turn off the power of main unit and disconnect the
power cable from the AC outlet.
10. Disconnect the RS232C cross cable, RS232C conver-
sion adapter and flexible flat cable.
7.[E.P.] ボタンを押し、書き込みを開始します。 (Fig. 4)
During downloading. /
Fig. 4
8. 書き込み完了後、 "Program Finished" が表示されます。
[OK] ボタンを押します。 (Fig. 5)
Fig. 5
9. 本機の電源を切り、電源コードをACコンセントから抜きま
す。
10.RS232Cクロスケーブル、RS232C変換アダプター、カー
ド電線を取り外します。
RX-N600/RX-N600D/HTR-N5060/
DSP-N600
書き込み中。
23