Remove The Power Supply Module; Remove The Mainboard; Remove The Speaker; Remove The Remote Control Board - Haier HL55XZK22 Service Manual

Service Manual
Model No.: HL55XZK22a
Then put the terminal bracket to the side.
3-5. Remove the Power Supply
Module
Remove the four screws indicated by the
red circles in below picture.
Then remove the power supply module.

3-6. Remove the Mainboard

Remove the eight screws indicated by the
rred circles in below picture.
12
Disconnected the coupler CN1 CN2 CN3
CN4 CN5 CN7 J25.
Remove the Mainboard.
3-7. Remove the Keypad Board

3-8. Remove the Speaker

Remove the four screws indicated by the red
circles in below picture.
Take out the speakers.
3-9. Remove the Remote Control
Board
Remove the two screws indicated by the red
circles in below picture.
Take out the remote control board.