Service Manual
Model No.: HL37XLE2
Then put the terminal bracket to the side.
Disconnected the coupler CNE1 CNE2 CN14
CN11 CN17 CON2.
Remove the Mainboard.
3-5. Remove the Power Supply
Modules
Remove the four screws indicated by the
red circles in below picture.
Then remove the power supply module.
3-6. Remove the Terminal Bracket
Remove the six screws indicated by the red
circles in below picture.
12
3-7. Remove the Remote Control
Board
Remove the one screw indicated by red
circles in below picture.
Disconnected the coupler CNE3 and CNE2
Remove the remote control board.
3-8. Remove the Speaker
Remove the four rubber bands indicated by
the red circles in below picture.
Take out the speakers.
3-9. Remove the Stand Backstop
Remove the six screws indicated by the red
circles in below picture.
Take out the stand backstop.
3-10. Remove the Indicator Light
Remove the two screws indicated by red
circles in below picture.
Disconnected the coupler CN2,
Remove the indicator light.