Adjustments - Craftsman 315.267560 Operator's Manual

WARNING:
The grinder should never be
connected to a power supply when you are
assembling parts, making adjustments, cleaning,
performing maintenance, or when the tool is not in
use. Disconnecting the tool prevents accidental
starting that could cause serious injury.
ATTACHING THE WIRE HANGER
See Figure 2.
Follow these steps to attach the wire hanger.
1. Unplug the grinder.
WARNING:
Failure to unplug the tool could result
in serious injury due to accidental starting.
2. Insert the ends of the wire hanger into the holes on
each side of the grinder housing.
WIRE
HANGER
INSERTING THE COLLET ADAPTOR
See Figures 3a and 3b.
Follow these steps to insert the collet adaptor.
1. Unplug the grinder.
WARNING:
Failure to unplug the tool could result
in serious injury due to accidental starting.
2. Depress and hold the spindle lock button.
3. Loosen the collet nut.
4. Insert the collet adaptor into the collet.
5. Tighten the collet nut securely with the wrench pro-
vided.
6. Release the spindle lock button.

ADJUSTMENTS

COLLET
ADAPTOR
Fig. 2
9
COLLET
NUT
COLLET
SPINDLE LOCK
BUTTON
TO
TIGHTEN
TO
LOOSEN
Fig. 3a
Fig. 3b