Personalizing The Projector Menu Display - BenQ MX813ST User Manual

Adjusting the sound level
To adjust the sound level, press Volume+/
Volume- on the remote control, or:
1. Repeat steps 1-2 above.
2. Highlight VOLUME and select a desired
sound level.
Turning off the Power on/off ring tone
To turn off the ring tone:
1. Repeat steps 1-2 in Muting the sound section.
2. Highlight Power on/off Ring Tone and select Off.
The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute
or changing the sound level will not affect the Power on/off ring tone.

Personalizing the projector menu display

The On-Screen Display (OSD) menus can be set according to your preferences. The
following settings do not affect the projection settings, operation, or performance.
• Menu display time in the SYSTEM SETUP: Basic > Menu Settings menu sets
the length of time the OSD will remain active after your last key press. The time length
ranges from 5 to 30 seconds in 5-second increments. Use
time frame.
• Menu position in the SYSTEM SETUP: Basic > Menu Settings menu sets the
OSD position in five locations. Use
• Language in the SYSTEM SETUP: Basic menu sets your familiar language for the
OSD menus. Use
• Reminder Message in the SYSTEM SETUP: Basic > Menu Settings menu sets
whether to display reminder messages on screen. Use
setting.
• Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo screen
to be displayed during projector start-up. Use
/ to select a preferred position.
/ to select your language.
/ to select a suitable
/ to select your desired
/ to select a screen.
Operation
41