Controls And Functions - BenQ MX813ST User Manual

Controls and functions

Projector
1
2
3
4
5
6
I
1. Power/POWER indicator light
I
Toggles the projector between standby
mode and on. See
projector" on page 25
Lights up or flashes when the projector is
under operation. See
65 for detail.
2. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings.
3. Volume/Arrow keys (
Right)
Adjusts the sound level.
When the On-Screen Display (OSD) menu
is activated, the #3 and #6 keys are used as
directional arrows to select the desired
menu items and to make adjustments. See
"Using the menus" on page 28
4. MODE/ENTER
Selects an available picture setup mode.
See "Selecting a picture mode" on page 34
for details.
5. ECO BLANK
Press the Eco Blank button to turn off the
image for a period of time with up to 70%
lamp power saving. Press again to restore
the image and sound. See
image" on page 39
10 Introduction
6.
7
6
8
9
3
7.
10
8.
"Starting up the
for details.
9.
"Indicators" on page
10. SOURCE
/ Left, /
for details.
"Hiding the
for details.
Keystone/Arrow keys (
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 27
details.
Activates the selected On-Screen Display
(OSD) menu item. See "Using the menus"
on page 28 for details.
TEMP indicator light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 65 for details.
LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See "Indicators" on page 65
details.
AUTO
Automatically determines the best
picture timings for the displayed image.
See "Fine-tuning the image clarity" on
page 27 for details.
Displays the source selection bar. See
"Switching input signal" on page 31
details.
/ Up, /
for
for
for