Fig 2.17 : Loopback Udp Test; Fig 2.18 : Web Server Test - Wiznet W5100E01-AVR User Manual

<Fig 2.17 : Loopback UDP Test>
2.4.2.5. Web Server
Web Server Application sends and receives web pages and EVB B/D control data through HTTP Channel
connected with web browser. For Web Server testing, set up any channel of W5100 as "Web Server"
Application Type using [Manager>>Channel Config] menu of EVB B/D.
When setting up "Web Server" Application Type of EVB B/D, set HTTP port as any value. Here, it's set to 80,
the default value. Refer to Chapter 2.4.1.2.
After setup for EVB B/D, run Web browser in the Test PC, type the URL(http://192.168.0.2/) of the EVB B/D
in the address field and connect to EVB B/D.
<Fig 2.18 : Web Server Test>
If the web browser is successfully connected to HTTP port of EVB B/D, the Web Page of <Fig 2.19> can be
viewed. In case Web Page of <Fig 2.19> is not shown, refresh the screen using the "Refresh" function of the
web browser.
16
© Copyright 2007 WIZnet Co., Inc. All rights reserved.