Editable Parameters - Medeli A1000 Owner's Manual

Voice

Editable Parameters

Common
Default Volume Change the default volume of the current
voice.
MONO/POLY Determines whether the voice is played
back with single notes only
(monophonically) or with multiple
simultaneous notes (polyphonically).
Portamento Time Determines the transition speed from the
first note played on the keyboard to the next
when portamento is switched on.
Modulation Depth Determines the intensity of the Vibrato
effect. Higher settings result in a more
pronounced Vibrato.
Left Octave Determines the default octave shift of the
edited voice when used as the LEFT
keyboard part.
Right Octave Determines the default octave shift of the
edited voice when used as any of the
RIGHT 1-3 keyboard parts.
Effect
Arpeggiator Including the current arpeggiator setting or not.
Reverb Level
Adjust the reverb level of the edited voice.
Chorus Level
Adjust the chorus level of the edited voice.
Envelope
Attack Determines the time it takes for a sound to reach
maximum volume after the key is pressed and
sound begun.
Decay Determines the time it takes for a sound to reach
its sustain level volume after the attack.
Release
Determines the time from when you your release
the key until the sound decays to silence.
Vibrato
Determines how fast one Vibrato effect cycle should
Rate
be played.
Determines how strong the Vibrato effect should be
Depth
played.
Delay Determines how quickly the Vibrato effect starts
after the sound start.
Level
ATTACK DECAY
Sustain Level
Key on
34
SUSTAIN RELEASE
Time
Key off
0-127
0-3
1-4
-1,0,1
-1,0,1
0-127
0-127
0-127
0-127
0-127
0-127
0-127
0-127
Pitch
DELAY
DEPTH
Key on
RATE
Time