Muting The Tracks Of A Style; Split Point Settings - Medeli A1000 Owner's Manual

Style

Muting the tracks of a style

1.
Press the [MIXER] button to call up the Mixer Display.
2.
Press "Style" tab to call up the relevant style setting display.
3.
Press the "S" button to set the channel to SOLO (orange font
display). You listen to only one instrument of this track. Press the
"S" button again to cancel SOLO (gray font display).
4.
Press the "M" button to mute the channel (orange font display).
You can listen to the playback of the style except this track. Press
the "M" button again to cancel MUTE (gray font display).
5.
Press the [EXIT] button to exit the Mixer Display.

Split Point Settings

The Split Point of the LEFT/RIGHT part section and the Split Point of
Chord section can be assigned separately. You can find the note
names of the two Split Point settings in the screen.
Split Point (Chord)—separates the Chord section for Style playback
from the section(s) for playing Voices (RIGHT 1, 2, 3 and LEFT).
Split Point (Left)—separates the two sections for playing Voices,
LEFT and RIGHT 1- 3.
1.
Pressing "SPLIT POINT" on main display or pressing "Split" on
voice selection display will call up the Split Setting display.
2.
Set the Split Point (Chord) and the Split Point (Left) to the same
note
Press "Chord + Left" to turn it on.
Use the DATA DIAL, the [+] or the [-] button or press the key directly
to set your desired split point.
3.
Set the Split Point (Chord) and the Split Point (Left) to different
notes.
Press "Chord + Left" to turn it off.
Press Chord Note Name and make the chord split point selected.
Use the DATA DIAL, the [+] or the [-] button or press the key directly
to set your desired chord split point.
Press Left Note Name and make the left split point selected. Use
the DATA DIAL, the [+] or the [-] button or press the key directly to
set your desired left split point.
Note:
Split Point(Left) cannot be set lower than Split Point(Chord), and Split
Point(Chord) cannot be set higher than Split Point(Left).
38
Split Point (C+L)
Chord & Left Voice R1, R2, R3,
Split Point (L)
Split Point (Chord)
Left
Chord
Voice R1, R2, R3,