Automatic cooking "go and stop"
All the cooking zones are equipped with an automatic "go and stop" cooking device. The
cooking zone starts at full power during a certain time, then reduces automatically its power on
the preselected level.
Start-up:
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
Switching off the automatic cooking :
Action
Zone selection
Power level selection
Timer (according to model)
The timer is able to be used simultaneous with all 4 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time :
Action
Zone selection
Increase power
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].
To stop the cooking time :
Action
Zone selection
To select « Timer »
To stop the « Timer »
If several timers are activated repeat the process.
Automatic stop at the end of the cooking time :
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound
rings.
To stop the sound and the blinking it is enough to press the key [
Control panel
Touch key [ + ]
Touch key [ + ]
Touch key [ + ]
Touch key [ - ]
Control panel
Touch key [ - ]
Touch key [ + ]
Control panel
Press key [ + ] from the zone
Press key [ + ] or [ - ]
Press key [
]
Press key [ - ]
Press key [
]
Control panel
Press key [ + ] from the zone
Press key [
]
Press key [ - ] and [
simultaneously
]
7
Display
[ 0 ] and control light on
[ 1 ]...to...[ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] [ 8 ] [ 7 ]...[ 1 ]
[ 7 ] is blinking with [ A ]
Display
[ 9 ] [ 8 ] [ 7 ]...[ 0 ]
Level selected
Display
[ 0 ]
[ 1 ] to [ 9 ]
Timer [ 00 ] min
[ 00 ] wents to 60,59...
The time increases
Display
[ 0 ]
The remaining time
[ 00 ] then stops
].