Section 9: Installing The Accessories - Montigo L42DF ST Installation & Maintenance Manual

L42DF-ST* Indoor Gas Fireplace
Step 8:
Removing the Door:
Grasp the Door on either side, usually midway and lift upward,
lift the door carefully up and away from the front of the fireplace.
See Figures 23g. Place the Door aside in a safe place while
maintenance and / or cleaning is being performed.
Figure 23g. Removing and installing the glass doors. Both sides
typical.
Installing the Door:
To install the door, hook the top edge of the door frame into place.
Lower the door into position and follow the previous steps shown
in reverse order.
WARNING
When installing the replace - gas lines, ttings, accesso-
ries or any other objects cannot impede the proper
movement of the door buckles.
Page 26
Installation

Section 9: Installing the Accessories

Installing Firestones in Natural Gas and Propane Fireplaces
The L42DF-ST* fireplace is supplied with firestones. Remove the
glass door. Follow these instructions to ensure all parts are re-
moved or replaced as required. Once the glass door is removed
place the firestones randomly across the pan as described in
Figure 24 to 24a.
DO NOT COVER THE BURNERS or PILOT
Figure 24. Completed firestone installation. Second Gen burner
shown.
(Note: DO NOT place ANY firestones on top of the burners or
pilot).
Figure 24a. Operating gas fireplace with firestones surrounding
burner tray. Second Gen burner shown.
Optional Cultured Rocks
The L42DF-ST* has the option of installing the cultured rocks which
mimic real stone. These may be spaced at random or in a visual
pattern of your preference in the burner pan. See the Montigo web
site for photographs and ideas.
WARNING
www.montigo.com
XG0182 - 151126