Table of Contents
Advertisement
Asynchronously running
engine.
Ensure correct routing of the
throttle control cable.
Make sure that throttle valve
cable is seated in guide 4 of
intake manifold and throttle
valve is resting against stop.
Position tank cover and install
two screws 5.
Press side panel into bracket in
area 3.
Install two screws 2.
Install screw 1.
Press side cover 1 into two
mounts.
Installing driver's seat (
Jump-starting
The wires leading to the
power socket do not have
a load-capacity rating adequate
for jump-starting the engine. Ex-
cessively high current can lead
to a cable fire or damage to the
motorcycle electronics.
Do not use the onboard socket
to jump-start the engine of the
motorcycle.
8
119
61).
z
Advertisement
Table of Contents
