BMW Motorrad retailer or the
8
specialized workshop of the TPC/
RDC sensor.
106
Removing front wheel
Make sure ground is level and
firm and place motorcycle on
its center stand.
with BMW Motorrad Integral
OE
ABS II
z
Unclip two retaining clips 1
of the sensor cable on brake
line.
Mask off area of wheel rim that
could be scratched in process
of removing brake calipers.
Once the calipers have
been removed, there is
a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disk on reassem-
bly.
Do not operate the handbrake
lever when the brake calipers
have been removed.
Remove securing screws 2 of
left and right brake calipers.
Push brake pads 3 apart
slightly by rocking the brake
caliper 4 back and forth against
the brake disk 5.
Carefully pull brake calipers
back and out until clear of
brake disks.