Epson SC-F6200 Series User Manual page 46

SC-F6200 Series/SC-F6000 Series
Item
User's Guide
Using the Control Panel Menu
Description
Paper Feed Pattern
Adjust
Value
Paper Suction -4 to 0
Roll Paper Normal
Tension
High
Extra High
Remove Skew
On
Off
Setting Name Enter a name of up to 22 characters for custom paper settings. Choose an
easy-to-remember name for quick selection.
Restore Yes
Settings
No
46
Use this setting if you are unable to resolve
banding issues (horizontal striped lines or uneven
colors) in the standard print area even after head
cleaning or head alignment.
Pattern Selected
Press the Z button to print an adjustment
pattern. Measure the distances between the "+"
symbols in the printed adjustment pattern.
Use only the distance between the center symbols
or the average of the distances between the left,
center, and right symbols.
After the adjustment pattern is printing, the length
of the pattern will be displayed in the control
panel. Press the u/d buttons to enter the
measured value and press the Zbutton.
ValueSelected
Choose an adjustment between -0.70 and +0.70%
Selecting too small a value causes dark bands;
adjust the amount upward. Similarly, choosing too
large a value causes white bands; adjust the
amount downward.
It is important to choose the appropriate amount
of suction for the paper used in order to maintain
the correct distance between the paper and the
print head. Choosing too high a value for thin or
soft paper will increase the distance between the
paper and the print head, causing print quality to
decline or preventing the paper feeding correctly.
If this happens, lower the paper suction. The
suction power is weakened when the parameter is
lowered.
Select High or Extra High if the paper wrinkles
during printing.
Select whether to enable (On) or disable (Off)
paper skew reduction.
Restore the selected custom paper settings to
default values.