High Print Quality; Notes On Usage And Storage; Installation Space; Notes When Using The Printer - Epson SC-F6200 Series User Manual

SC-F6200 Series/SC-F6000 Series
To load roll paper, simply place it on the roll rest and
attach roll paper adapters to both ends. The roll rest is
low, making it easy even for short workers to load paper.
"Loading Roll Paper" on page 25
U
Easy maintenance
Roll paper and all replacements, including ink refills,
Maintenance Boxes, and cutters, are installed from the
front, allowing the printer to be placed against a wall.
The printer does not have to be moved to allow rear
access.
Ready a Head Maintenance Kit
This allows you to clean the print head. If ink drips onto
the print results even after performing head cleaning,
clean the print head using Head Maintenance Kit. You
can remove lint that has adhered to the nozzle surface of
the print head.
"Using the Head Maintenance Kit" on page 57
U

High Print Quality

Providing newly developed Black ink
The development of High Density Black ink has
improved the density of black color when compared to
Black ink, providing a richer, deeper black color. In
addition, the color gamut has been widened, thereby
realizing vivid colors to create a bold contrast.
Select High Density Black or Black as the Black ink type
when you buy the printer. When changing the type of
Black ink being used, the ink tank should only be
changed by a service engineer. Changing the type of
Black ink is provided for a fee.
Contact your dealer or Epson Support.
User's Guide
Introduction
Notes on Usage and
Storage

Installation space

Make sure that you secure the following space, clear of
any other objects, so that paper ejection and
consumable replacement are not obstructed.
See the "Specifications Table" for the external
dimensions of the printer.
U
*1 When using the SC-F6200 Series
*2 When using the SC-F6000 Series

Notes when using the printer

Note the following points when using this printer to
avoid breakdowns, malfunctions, and print quality
decline.
❏ When using the printer, observe the operating
19
"Specifications Table" on page 85
temperature and humidity range described in the
"Specifications Table".U
on page 85
ven when the conditions above are met, you may
not be able to print properly if the environmental
conditions are not suitable for the paper. Be sure to
use the printer in an environment where the paper's
"Specifications Table"