Functional Elements; Installation; Transporting The Unit; Unpacking The Product - Vaillant ecoTEC plus Installation And Maintenance Instructions Manual

3.4

Functional elements

1 Gas-air mixture unit
2 Flue pipe
3 Flue gas analysis point
4 Gas valve
5 Ignition transformer
4

Installation

4.1

Transporting the unit

Important: With regard to the regulations of 1992 concern-
ing the manual handling of loads, the unit exceeds the
weight that can be lifted by a single person.
4.1.1 General
▶
Hold the load as close as possible to your body. Avoid
rotational movements. Instead, reposition your feet.
▶
If the unit is being lifted by two persons, ensure your
movements are coordinated during lifting.
▶
Avoid bending your upper body – do not lean forwards or
to the side.
▶
Wear suitable non-slip protective gloves in order to pro-
tect your hands against sharp edges. Ensure that you are
carrying the load securely.
▶
If required, get somebody to assist you in this.
4.1.2 Unloading the box from the delivery van
▶
It is recommended that two people lift the unit together.
0020200871_00 ecoTEC plus Installation and maintenance instructions
1
2
3
4
5
6
7
8
9
6 Heat exchanger
7 Air intake pipe
8 Condensate siphon
9 Electronics box
▶
Lift the box using the straps provided.
▶
Use safe lifting techniques – keep your back straight and
bend your legs at the knee.
▶
Hold the load as close as possible to your body.
▶
If the unit is being lifted by two persons, ensure your
movements are coordinated during lifting.
▶
If required, get somebody to assist you in this.
4.2

Unpacking the product

1. Remove the product from its box.
2. Remove the protective film from all of the product's
components.
4.3

Checking the scope of delivery

▶
Check that the scope of delivery is complete and intact.
4.3.1 Scope of delivery
Num-
Description
ber
Heat generator
1
Hanging bracket
1
Gas isolator cock
1
1 Gas pipe
1 Condensate drain hose
1 Installation template
1 Enclosed documentation
Installation 4
7