Notes On The Documentation; Observing Other Applicable Documents; Storing Documents; Applicability Of The Instructions - Vaillant ecoTEC plus Installation And Maintenance Instructions Manual

2 Notes on the documentation

2 Notes on the documentation
2.1

Observing other applicable documents

▶
You must observe all the operating and installation in-
structions included with the system components.
2.2

Storing documents

▶
Pass these instructions and all other applicable docu-
ments on to the system operator.
2.3

Applicability of the instructions

These instructions apply only to:
Product article number
Article number
VU 126/6-5 OV (H-GB) 0010015669
ecoTEC plus
VU 156/6-5 OV (H-GB)
0010015670
ecoTEC plus
VU 186/6-5 OV (H-GB) 0010015671
ecoTEC plus
VU 246/6-5 OV (H-GB)
0010015672
ecoTEC plus
VU 306/6-5 OV (H-GB) 0010015673
ecoTEC plus
3

Product description

3.1

Serial number

The serial number is located on a plate behind the front flap.
The plate is in a plastic fish plate. You can also display the
serial number in the display.
3.2

Information on the identification plate

The identification plate is mounted on the underside of the
product in the factory.
The identification plate keeps record of the country in which
the product is to be installed.
Information on the Meaning
identification plate
Barcode with serial number
Serial number For quality control purposes; 3rd and 4th
digits = year of production
For quality control purposes; 5th and 6th
digits = week of production
For identification purposes; 7th to 16th
digits = product article number
For quality control purposes; 17th to 20th
digits = place of manufacture
ecoTEC plus Product description
2H, G20 - 20 mbar Factory setting for type of gas and gas
(2 kPa) connection pressure
Cat. Approved gas category
Condensing techno- Efficiency class of the boiler in accord-
logy ance with EC Directive 92/42/EEC
6
Information on the
identification plate
Type: Xx3(x)
PMS
PMW
V/Hz
W
IP
Pn
Pnc
Gas Council
Number
P
41-044-71
Qn
41-044-72
Qnw
41-044-73
T
41-044-74
max.
NOx
41-044-75
Code (DSN)
GC no.
3.3
The CE label shows that the products comply with the basic
requirements of the applicable directives as stated on the
identification plate.
The declaration of conformity can be viewed at the manufac-
turer's site.
Installation and maintenance instructions ecoTEC plus 0020200871_00
Meaning
Permissible flue gas connections
Maximum water pressure in heating
mode
Maximum water pressure in hot water
handling mode
Electric connection
Max. electrical power consumption
Level of protection
Heating mode
Nominal heat output range in heating
mode
Nominal heat output range in heating
mode (condensing technology)
Nominal heat output range in hot water
handling mode
Nominal heating load range in heating
mode
Nominal heating load range in hot water
handling mode
Max. flow temperature
NOx class for the product
Specific product code
→ "CE label" section
Read the instructions.
→ "Recycling and disposal" section
Gas council number

CE label