LA-140 – Mounting your Radiator
5
Pull CAT-5 and Coaxial cables through
Pull CAT-5 and Coaxial cables through hole in Wall Box Plate (if necessary).
6
Determine correct angle
Determine correct angle setting to use for the radiator, see page 11 of designing a system.
7
Attach Radiator to Corner Mount Bracket
Attach Radiator to Corner Mount Bracket using Tilt Arm "A" and Tilt Arm "B." Use the Tilt Bolt to fasten the tilt arms
together.
ATTENTION: Note the angle measurements on Tilt Arm "B" and verify that the correct angle is selected
l
46
before fully tightening Tilt Bolt.