Setting Port Numbers - Canon imageRunner 2545i Addendum Manual

Setting Port Numbers

Depending on your network environment, you can change the port number for each protocol. In
addition to the already available port settings, the HTTPS port setting is now available, enabling you
to change the default port number (443). Press [ ] or [ ] to display the page containing the key for
the desired protocol.
Changes made to Port Number Settings become effective when the machine is restarted. To restart the
machine, turn it OFF, wait at least 10 seconds, and then turn it ON.
•
For instructions on how to set the port numbers, see Chapter 3, "Setting up the Machine for Your Network
Environment, " in the System Settings Guide .
•
The default settings are as follows:
- LPD: 515
- RAW: 9100
- HTTP: 80
- SMTP Receive: 25
- POP3 Receive: 110
- FTP Sending: 21
- SMTP Sending: 25
- SNMP: 161
- WSD: 3702
- HTTPS: 443
Updates Regarding Additional Functions
17