Troubleshooting
Phenomenon
DWU951/DHD951/DWX951/DXG1051/
DWU851/DHD851/DWX851 User's Manual - Operating Guide
Cases not involving a machine defect
The SAVING function is working.
The connected equipment may not be supported by HDBaseT.
Check if the IR setting is OFF under HDBaseT.
Check if the LAN setting is HDBaseT.
Check if the LAN setting is HDBaseT.
This projector is compatible with 100BASE-T only.
Try to change the LAN cable.
Check if the extension connector is compatible with CAT5e.
Check if it is connected with a cable of 5CFB or greater, or
Belden 1694A or greater.
Check if a cable with a length of 100m or less is used.
Try to change the cable.
Check if a supported signal format is input.
020-000661-03 Rev. 1 (09-2014)