Touch Panel Calibration; Adjusting The Picture - Pioneer AVH-X8750BT Owner's Manual

On (default):
Sounds a beep.
Off:
Does not sound a beep.
Adjusting the response
positions of the touch panel

(touch panel calibration)

If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response
positions of the touch panel screen.
p This setting is available only when you
stop your vehicle in a safe place and apply
the parking brake.
p Do not use sharp pointed tools such as a
ballpoint or mechanical pen, which could
damage the screen.
p Do not turn off the engine while saving
the adjusted position data.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Touch Panel Calibration].
The touch panel adjustment screen appears.
4 Touch two corners of the screen
along the arrows, and then touch
the centers of two + marks at the
same time twice.
5 Press the HOME button.
The adjustment results are saved.
6 Press the HOME button once again.
Proceed to 16-point adjustment.
If you press and hold the HOME button,
the adjustment is canceled.
7 Gently touch the center of the +
mark displayed on the screen.
The target indicates the order.
After you touch all marks, the adjusted
position data is saved.
If you press the HOME button, the previ-
ous adjustment position returns.
If you press and hold the HOME button,
the adjustment is canceled.
8 Press and hold the HOME button.
The adjustment results are saved.
Setting the dimmer function
You can specify the timing that the dimmer
function is to be turned on.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Dimmer Settings].
4 Touch [Dimmer Trigger].
The pop-up menu appears.
5 Touch the item you want to set.
Auto (default):
Activates the dimmer function when the
vehicle's headlights are on (nighttime).
Manual:
Enables to set whether to activate the
dimmer function.
Time:
Enables to set the duration of time for the
dimmer function to be active.
p If "Manual" is selected, set whether to
activate the dimmer function.
For details, refer to Setting whether
to activate the dimmer function on
page 47.
p If "Time" is selected, specify the duration
for the dimmer function to be active.
For details, refer to Setting the duration of
time for the dimmer function to be active
on page 47.
Setting whether to activate
the dimmer function
You can set whether to activate the dimmer
function at nighttime.
p This function is available only when
"Dimmer Trigger" is set to "Manual".
For details, refer to Setting the dimmer
function on page 47.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Dimmer Settings].
4 Touch [Day/Night].
The pop-up menu appears.
5 Touch the item you want to set.
Day (default):
Deactivates the dimmer function.
Night:
Activates the dimmer function.
Setting the duration of time
for the dimmer function to be
active
You can set the duration of time for the
dimmer function to be active.
p This function is available only when
"Dimmer Trigger" is set to "Time".
For details, refer to Setting the dimmer
function on page 47.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Dimmer Settings].
4 Touch [Dimmer Duration].
The duration setting bar appears.
5 Touch the desired points on the
duration setting bar, or slide the
cursors to specify the start time
and the end time, respectively.
p The time display format depends on the
"Time Format" setting.
p The value displayed at the center of the
duration setting bar ("12" for 12-hour
format and "00" for 24-hour format)
indicates midnight. The values to the
left of the value at the center are for the
afternoon, and the values to the right of
value at the center are for the morning.
p The default values are "18:00" (start time)
and "6:00" (end time).
p The value can be changed in 15-minute
steps.

Adjusting the picture

You can adjust the picture for each source,
the Application screen, and rear view
camera.
CAUTION
For safety reasons, you cannot use some
of these functions while your vehicle is in
motion. To enable these functions, you must
stop in a safe place and apply the parking
brake.
1 Display the screen you wish to
adjust.
2 Press the HOME button to display
the Top menu screen.
3 Touch the following keys in the
following order.
The "System" screen appears.
4 Touch [Picture Adjustment].
5 Touch any of the following keys to
select the function to be adjusted.
Picture adjustment items are displayed.
Chapter
20
47
En