Running - Dixon RAM 48 CE Operator's Manual

Running

1. Release the parking brake by pushing the button
and moving the lever downward.
NOTE: The mower is equipped with an operator
presence system. When the engine is running,
any attempt by the operator to leave the seat
without first setting the parking brake will shut off
the engine.
2. Move the steering controls to the neutral position
(N).
3. Push the release button on the cutting height lever
and move lever to the pin, release the button.
WARNING!
Ensure that no one is near mower
when engaging blade switch.
Make sure the work area is free from
objects that could be thrown by the
rotating blades.
4. Move throttle control to full throttle.
5. Engage the mower deck by pulling out the blade
switch.
30
OPERATION
Parking brake released
Mower deck lifting lever
Set blade engagement and throttle control
8058-191
8058-019
8058-149