Table of Contents
Advertisement
Running
1.
Release the parking brake by pushing the button
and moving the lever downward.
NOTE: The mower is equipped with an operator
presence system. When the engine is running,
any attempt by the operator to leave the seat
without first setting the parking brake will shut off
the engine.
2.
Move the steering controls to the neutral position
(N).
3.
Set retaining pin into selected cutting height and
secure the opposite side with a cotter hairpin.
WARNING!
Ensure that no one is near mower when
engaging blade control lever.
4.
Push the release button on the cutting height lever
and move lever to the pin, release the button.
5.
Set the cutting height with the cutting height
adjustment lever.
OPERATION
Parking brake released
Secure selected cutting height
Mower deck lifting lever
8058-020
8058-024
8058-019
29
Hide quick links:
Advertisement
Table of Contents
