Table Of Solutions - Midland CT 710 Instruction Manual

Table of solutions

PROBLEM
The radio doesn't switch
on
Battery recharge doesn't
last long
Reception led turns on
but no sound heard
The keypad doesn't work The keypad lock function hasn't been ena-
In standby, the radio
transmits without
pressing PTT
Some functions cannot
be stored
Reception of other
group signal while
transmitting
28 |
SOLUTION
The battery may be exhausted. Recharge it.
Uncorrected installation. Re-install it.
The battery pack is over. Change it with a
new one.
Battery pack is not completely charged.
Make sure the volume is not too low
Make sure to have the same CTCSS and DCS
codes of your group
bled.
VOX level has been set too low. Adjust it.
Ensure to be on Channel mode. In Channel
mode some functions can be set only
through the programming software.
Select another CTCSS/DCS for your group
CT710 Instruction Guide