Battery Installation And Charging - AT&T TL90070 User Manual

Getting started

Battery installation and charging

Install the battery as shown below.
Step 1
Plug the battery connector
securely into the socket
inside the handset battery
compartment, matching the
color-coded label. Insert the
supplied battery with the label
THIS SIDE UP facing up as
indicated.
CHARGE light
Step 3
Charge the handset by placing it
face up in the telephone base or
charger. The CHARGE light is on
when charging.
After you install your telephone
or power returns following a
power outage, the handset will
prompt you to set the date and
time. To skip setting the date
and time, press OFF/CLEAR.
Step 2
Align the cover flat against
the battery compartment, then
slide it upwards until it clicks
into place.
7
SET DATE
--/--/--
MM/DD/YY
SET TIME
--:-- --