Parking Brake Cable - Cushman Haulster 84065 Parts & Maintenance Manual

4.8

PARKING BRAKE CABLE ___________________________________________________

1. Remove the engine cover. Put chocks in front of and
behind at least two wheels at opposite corners of
vehicle.
2. Engage parking brake. If handle is at an angle
greater than 45° to the panel adjustment is required.
3. Disengage parking brake.
4. Tighten adjustment nut (E) a couple of turns.
5. Engage parking brake. Repeat steps 3 and 4 until
handle is at an approximate 45° angle when parking
brake is engaged.
ADJUSTMENTS
E
4
Figure 4I
13