O Pe R A Ti Ng I Nt Ru Ctio Ns - Oster MGSTSL5010-449 Instruction Manual

O PE R A TI NG I NT RU CTIO NS

USING THE 3 SPEEDS CONTINUOUSLY
You may select among one of the 3 speeds to perform the task according to your own
preference and to follow the instructions from your recipes. If you wish to use one of the
3 speeds continuously, simply turn the Dial clockwise to one of the 3 speeds and the unit
will start right away. Once you achieve the desired result, turn the Dial counterclockwise
to the off position "O".
USING THE PULSE FUNCTION
For more controlled blending or mixing use the "Pulse" function. Turn Dial
counterclockwise to start using the pulse function. This function needs to be controlled
manually on and off until the desired results are achieved. Repeat cycle as desired.
TIPS
• When using the dry grinding jar, fill the jar up to the level of the blades.
• When using the wet grinding and blending jars, fill jars up to 2.5 cm from top of jar.
• When using the blending jar for ice crushing, place 6 ice cubes or approximately 2
cups of ice at a time.
• Cut all firm fruits and vegetables into pieces no larger than 1.8 cm (1/2 inch) to 2.5 cm
(1 inch). Cut all kinds of cheeses into pieces no larger than 1.8 cm (1/2 inch).
CAUTION: Operate only with the lids in place.
MANUAL RESET BUTTON (Overload Protector)
If unit stalls, if blade jams or stops, turn the Dial to the off position "O". Let it cool down for
a few minutes. Remove Jar from Base, turn Base upside down and push the Overload
Protector (OLP). Make sure the blades can spin freely before using again.
TIP: If you have to use the manual reset button (OLP), try reducing the quantity of the
materials in the jar or adding some water.
Manual
Reset
Button
(OLP)
4
Manual
Reset
Button
(OLP)