Using the device
GPS status
Touch
to enter
In this mode you can read the data concerning
the GPS positioning. It is also possible
to reset the GPS receiver.
Click
to return to the previous screen.
Remark!
The GPS module can be only properly tested in the open air,
indoors no signal will be reached.
System info
Touch
enter SYSTEM mode.
Here you can check the basic info about the device.
It is also possible to restore the default (factory) setting.
the screen here.
Touch the RESET button
to restore the factory settings.
Remark!
All unsaved data will be erased when the system is reset.
Click
to return to the previous screen.
GPS STATUS
mode.
, than choose YES,
15