AT&T TL30100 User Manual page 19

Appendix
Troubleshooting
My cordless handset isn't performing normally.
• Make sure the power cord is securely plugged into the
telephone base. Plug the power adapter into a different,
working electrical outlet not controlled by a wall switch.
• Move the cordless handset closer to the telephone base. You
might have moved out of range.
• Reset the telephone base. Unplug the electrical power. Wait
for 15 seconds then plug it back in. Allow up to one minute
for the cordless handset and telephone base to reset.
• Other electronic products such as HAM radios and other DECT
phones can cause interference with your cordless telephone.
Try installing your telephone as far away as possible from these
types of electronic devices.
Out of range or no pwr at base appears on my cordless
handset.
• Ensure that the telephone base is powered up.
• Place the cordless handset in the telephone base for one
minute to allow the cordless handset and base to synchronize.
• Move the cordless handset closer to the telephone base. You
might have moved out of range.
• Reset the telephone base. Unplug the electrical power. Wait
for 15 seconds then plug it back in. Allow up to one minute
for the cordless handset and telephone base to reset.
• Other electronic products such as HAM radios and other DECT
phones can cause interference with your cordless telephone.
Try installing your telephone as far away as possible from these
types of electronic devices.
15