Battery Installation And Charging; Battery Installation - AT&T TL30100 User Manual

Getting started

Battery installation and charging

Battery installation

Install the battery as shown below.
1. Plug the battery
connector securely
into the socket
inside the handset
battery compartment,
matching the color-
coded label.
CHARGE light
4. Charge the handset by placing
it face up in the charger. The
CHARGE light is on when charging.
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model
BT166342). To order, visit our website at
1 (800) 222-3111
or call
2. Insert the supplied
battery with the label
THIS SIDE UP facing
up as indicated.
To replace the battery, press the tab
and slide the battery compartment
cover downwards. Lift out the old
battery and disconnect it from the
handset. Follow the instructions above
to install and charge the new battery.
www.telephones.att.com
. In Canada, dial
6
3. Align the cover flat
against the battery
compartment, then
slide it upwards until it
clicks into place.
1 (866) 288-4268
,
.